Funny Easter Bunny - WallArt
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.46 – €1.78 net (excluding VAT)
For file: Funny_Easter_Bunny_0.4n_0.2mm_PLA_COREONE_1h6m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.62 excluding VAT (range midpoint).
- Weight reported by the author
- 31 g
- Print time reported by the author
- 1.11 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Modern wall art inspired by the Funny Easter Bunny with Easter egg.
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 105
- Makes
- 4
- Views
- 269
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Spring & Easter
- License
- Creative Commons — Attribution — Share Alike
EN - Description
Wall decoration inspired by the Funny Easter Bunny with Easter egg.
The model is designed as a flat decorative element. It is optimized for 3D printing without the use of supports. The multicolor design is achieved by changing the filament at precisely defined layer heights.
Perfect as wall decor for workshops, offices, gaming rooms, aviation enthusiasts, or military aircraft fans.
CZ - Popis
Nástěnná dekorace inspirovaná vtipným velikonočním zajíčkem s velikonočním vajíčkem.
Model je navržen jako plochý dekorativní prvek. Je optimalizovaný pro 3D tisk bez použití podpěr. Vícebarevného provedení je dosaženo změnami filamentu v přesně definovaných výškách vrstev.
Vhodné jako dekorace do dílny, kanceláře, herny nebo pro fanoušky vojenského letectví.
Dimensions | Rozměry
X: 248.61 mm
Y: 206.80 mm
Z: 1.20 mm
Color change levels | Úrovně změny barvy
White | Bílá: 0.0 – 0.6 mm
Black | Černá: 0.8 – 1.2 mm
Recommended print settings | Doporučené nastavení tisku
Material | Materiál: PLA, PET-G
Layer height | Výška vrstvy: 0.2 mm
Perimeters | Perimetry: 1
Infill | Výplň: 10–15 %