1 / 2
Kaercher WD connector for big cyclone separator
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A connector for the Kaercher vacuum cleaner
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 61
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the model of an adaptor for https://www.printables.com/model/848504-big-cyclone-separator-for-a-vacuum-cleaner to connect a Kaercher WD vacuum cleaner. This is a substitute for the original vacuum connector. The nozzle of the Kaercher tube changes diameter from 35 mm to 36 mm. So my first attempt with only 35 mm straight was a very tight fit ;-)
The files contain the 3mf model as well as the FreeCAD construction files in case someone needs to make adjustments.
I printed the connector in black PETG with 0.2 mm layer height in normal mode.