Project Hail Mary - Eridian Grace Sculpture Model
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.96 – €1.17 net (excluding VAT)
For file: Outside support / gracekeychain-unsupported_04n_02mm_pla_mk4s_1h16m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.06 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 1.27 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Little figurine/sculpture Rocky made for Grace in the movie Project Hail Mary. Model is downloaded from official site.
- Rating
- 4.923 / 5
- Likes
- 1,871
- Downloads
- 28,485
- Makes
- 125
- Views
- 88,415
- Reviews
- 91
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I did not make this model, but decided to upload it here so it is preserved. Just in case it gets deleted from official site (https://projecthailmary.com/).
3D Model Print Instructions:
Grace Sculpture Keychain
This model includes two file options:
● Supported STL – Pre-supported and ready to print
● Unsupported STL – Ideal if you want to scale the model or create your own custom
supports
The figure can be printed using either a resin or filament (FDM) 3D printer.
At 100% scale, the figure prints at approximately 2.75 inches tall.
Printing Steps
● Step 1 – Choose Your File Type
○ Option A: Supported STL
■ Supports are already included and optimized for printing
■ No additional edits are required before slicing
○ Option B: Unsupported STL
■ Scale the model to any size you prefer
■ You will need to generate supports before printing
■ Most slicers offer both automatic and manual support options
● Step 2 – Import File
Download and import the STL file into your slicer program (such as Chitubox, Bambu
Studio, or Lychee).
● Step 3 – Prepare the Print
Use your slicer to generate the print layout and settings required for your specific 3D
printer.
● Step 4 – Post-Print
Once printing is complete:
● Carefully remove the supports
● For easier removal, place the model in warm water to soften the supports and
reduce surface damage
● Once model is cleaned - use a standard key ring and place in right hand of model
to complete your keychain
Pro Tips:
● Resin prints will capture finer detail than filament prints
● For best results, print at a 0.03–0.05 layer height (resin) or 0.1–0.2 (FDM)
● Always cure resin prints fully after cleaning