System 58: Static Sorter Inserts, Small Compartmented Boxes with Lid; FreeCAD included
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.77 – €0.94 net (excluding VAT)
For file: insert-static-1comp_0.4n_0.2mm_PLA_MK4S_31m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.86 excluding VAT (range midpoint).
- Weight reported by the author
- 18 g
- Print time reported by the author
- 30.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Static Sorter Inserts, also usable as Small Compartmented Boxes with Lid. FreeCAD design is included. No supports.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 32
- Makes
- 0
- Views
- 165
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- GNU General Public License v3.0
This is part of the "System 58" collection of sorting boxes. These boxes can be used standalone as a simple small box with a lid or they can be used as basic inserts for the bigger hinged boxes of this system.
These are four variants of the basic size insert/box with 1, 2, 3 and 4 compartments respectively.
Collection of System 58 Boxes: https://www.printables.com/@konrad_2520545/collections/3048692
There is a variant of this box that allows to insert and remove the internal separators flexibly, if you prefer this: https://www.printables.com/model/1646988-system-58-sorter-box-flexible-insertsboxes
Printing
You can use any material. PLA will usually be fine, unless you need more heat resistance.
I included GCode for the Prusa MINI+ and MK4S (using the HF0.4mm nozzle) - both using PLA.
If you want to print with different material or on a different Prusa Printer: the PrusaSlicer projects are also included.
If you want to print from STL: print the box itself standing upright, overturn the lid 180 degrees before printing. Neither needs any support material.
License
I chose GPL deliberately: I want this design to remain free. Feel free to print as many as you like, feel free to sell your prints. But, if you give prints away or sell them include a link back to here; if you change the design or add features - please publish your "sources", a'ka CAD files under the same license.
The included CAD files of this design were made with FreeCAD 1.0.2. I tried to label all features to make it easy to understand what was intended. Send me a message if you have questions. This design makes use of clones to make the variations.