Buran HueForge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Model is 180x243 mm in size (188x250 mm with frame)
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 16
- Makes
- 1
- Views
- 69
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Model is 180x243 mm in size (188x250 mm with frame)
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 4mm and the Actual Thickness is 2.96mm
BURAN_01
#000000 PLA+ Elegoo Black Transmission Distance: 0.1
#abb4ba PLA+ Elegoo Gray Transmission Distance: 4.6
#e4e8e7 PLA+ Elegoo White Transmission Distance: 5.5
#000000 PLA+ Elegoo Black Transmission Distance: 0.1
#a62f36 PLA+ Elegoo Red Transmission Distance: 4.3
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Gray
At layer #18 (1.52mm) swap to White
At layer #24 (2mm) swap to Black
At layer #26 (2.16mm) swap to Red for the rest.
BURAN_02
#000000 PLA+ Elegoo Black Transmission Distance: 0.1
#abb4ba PLA+ Elegoo Gray Transmission Distance: 4.6
#e4e8e7 PLA+ Elegoo White Transmission Distance: 5.5
#a62f36 PLA+ Elegoo Red Transmission Distance: 4.3
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Gray
At layer #15 (1.28mm) swap to White
At layer #24 (2mm) swap to Black
At layer #25 (2.08mm) swap to Red for the rest