CFMOTO 800 MT-X Gear Position Sensor Cover and Spacer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
CFMOTO 800 MT-X Gear Position Sensor Cover and Spacer
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 186
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Have a nice day, everyone!
Replacing the original front sprocket cover is quite a popular tuning; nevertheless, I didn't find a particular set especially for the MTX, but found many options for the KTM 790/890 and others.
The front sprocket cover, with no surprise, is 100% compatible with the MTX, but without the original sprocket cover you leave the Gear Position Sensor (GPS) unprotected.
Almost all sprocket covers are supplied with GPS covers, but mostly without spacers and oversized bolts.
Because of the plastic tie, you need to raise GPS cover at least by 4.5 mm.
You can achieve it with an M6 hex nut or otherwise use my spacer.
If you ordered a sprocket cover without a GPS cover, use one designed by me.
To mount the cover, regardless of its type, you need 2 M5x20 bolts and washers.
P.S:
I printed both parts from PETG and will test them during the current season.
If you are concerned about the PETG melting point, you can use temperature-resistant filaments like PA-GF
