Basic Automata box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an automata box with a guitar and music moving with custom cams.
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 25
- Makes
- 1
- Views
- 140
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Share Alike
This is a automata box with a guitar and music note being moved vertically with a hex cam and an eccentric cam that move 2 objects up and down with 3 different shafts and a crank on the right side of the box. the objects on this one are a guitar (without strings because they are too thin) and a music note.
INSTRUCTIONS>>>>
First assemble the box pieces, either print them together or print and glue them together, I made this myself out of wood instead of 3d printing the sides, but 3d printing and gluing works, then insert the axle end caps on both sides, slide the camshaft through the caps, and attach cams, add the crank handle on the side of the camshaft that sticks out. Insert the top follower guides on to the holes on the top, then insert the camshafts with the toys into the follower guides through the inside of the box. make sure the cams line up and spin the crank. both toys should move up and down and different speeds and patterns. (collisions fixed)
This was created for Hack Club's Construct