Voron Tophat Back Panel For Toolchangers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Voron Trident/V2.4 Tophat Back Panel for use with Bondtech INDX or Stealthburner
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 21
- Makes
- 0
- Views
- 389
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Open Community License v1
Description
Custom back panel for use with LDO Stealthchanger Tophat Kit: https://ldomotion.com/products/stealth-changer
Also applicable to custom 200mm tall tophats made of 2020 extrusions. Designed for 8 tool setups and active ventilation to outside.
Exhaust Panel accepts a 6020 fan for active ventilation. Recommend hooking up to a 4 inch / 100mm Dryer hose to vent to outside.
Printing Instructions
Print out of ABS or ASA with standard Voron settings
ASA-GF or CF recommended to reduce warping potential
Orient parts to be printed on the flat back faces.
Assembly Instructions
Apply 1mm thick foam tape around edge faces and/or on 2020 extrusion for heat and fume retention
Loose assemble M3 screws and T Nuts into upper and lower positions
Install into tophat assembly
Parts Needed
14x M3 x 8mm SHCS
14x M3 T Nuts
Foam Tape 1mm thick, 5mm wide, 3m length
4x M3 x 4 x 5 heat insert nuts for 6020 fan installation
16x PC4-M10 Bowden Tube Connectors