Parametric Honeycomb Storage Wall Command Adhesive (or other tape) mount and open hexes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
OpenSCAD model to adhere a HSW section to the wall
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 92
- Makes
- 0
- Views
- 622
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted something to adhere a Honeycomb Storage Walls to my walls using Command adhesive. I saw a non-parametric model that was kinda close to what I wanted, but it only did one axis, so I created something similar with OpenSCAD.
I've got the parameters assuming you want a Large sized Command strip, but if you want something different, you can go into the model and tweak things.
Library requirements
This requires you to install the BOSL2 library and the OpenSCAD Honeycomb storage wall insert module to work. There's also a mesh, and that'll probably work for you, but you really want the OpenSCAD version so you can crank out whatever dimensions you desire.
Printing settings
It's designed to print without supports and go straight into the honeycomb without needing any extra inserts.
The geometry for HSW is generally designed for PETG. I printed mine with Prusament white PETG on a 0.4mm nozzle.
If you like this:
I have a paramaterized honeycomb storage wall that will fit any size
I have a paramaterized 90 degree angle joiner, for the corners.
I have a paramaterized ruler (or other long rectangular things) holder
I have a paramaterized feeler gauge (or other stubby rectangular thing) holder
I have a paramaterized de-soldering sucker holder
I have a collection of all of the Honeycomb Storage Wall bits I use myself