1 / 3
Foxbat/Parallax shovel handle minimal reprints and hardware — image 1
1 / 3

Foxbat/Parallax shovel handle minimal reprints and hardware

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A shovel handle for the Foxbat or Parallax with only 1 part needing to be changed and 2 extra screws.

Rating
0 / 5
Likes
5
Downloads
9
Makes
0
Views
69
Reviews
0

Updated at source:

Model information

Category
Outdoor Toys
License
Creative Commons — Attribution — Noncommercial — Share Alike

A Foxbat and Parallax handle with minimal reprints and hardware. 

I printed both parts with 5 walls and 25% gyroid density. Place the middle part with the arms facing up and the back part with the curved side facing down. There should be enough support in the angle to not have the sides fall.

Higher density=stronger build.

Only 2 more small screws should be needed compared to the normal T-pull handle. Screw placement should be self-explanatory, but regardless they should go in through the small holes with the heads of the screws in the adjacent cylindrical openings.

Tags