Gridfinity Bin 6x3x10 thicker walled
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Three varying side wall thicknesses
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 48
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I created this bin for a Fluke multimeter, as I didn't want a moulded shape. This is because I have the magnetic strap on the meter and also wrap the leads around.
Due to running an Ender 3 still, this was too large to print on the bed. So it had to be split (within the browser). As I was using a 0.6 nozzle, I wanted the side walls to be thicker. On my image you can see I got warped walls (printing too fast and top of the wall didn't meet), so as I'm lazy, I just glued in some supports after. If your printer is more dialed then mine or just a better printer, it should not warp like so.
Gridfinity bin 6x3x10 - 1.2mm side wall thickness
Gridfinity bin 6x3x10 Thicker - 1.8mm side wall thickness
Gridfinity bin 6x3x10 Thickerer - 2.0mm side wall thickness
All the heights are 10u and stackable. No magnet holes. Step file included.
As stated, in the image it was printed with a 0.6 nozzle for speed and strengh, in PLA.