Door Hook for IKEA TJUSIG
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The original metal door hooks didn't fit our door, so I remodelled the hook.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 1
- Views
- 53
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Public Domain
The original metal door hooks didn't fit our door, so I remodelled the hook. If you have the same problem, open the fcstd file in FreeCAD and adjust the sketch component, then re-export and print.
This model is compatible with the IKEA TJUSIG coat hanger 302.508.70 / 302.508.65
The thickness of the screw-holding part was increased, as the coats on the hangers apply a bit of torsion force to this.
I printed it in Black ASA, but PETG should be fine. I would recommend NOT to print this in PLA as the torsion force will deform the part over time.