Custom Gravity Fidget – Egg Shape (Print-in-Place)

This is a customizable gravity-style fidget in an egg shape. It uses a series of inner rings that drop and move with gravity, creating a really satisfying motion when you tilt or rotate it.

The model is designed to print in place with no supports, so everything should move right off the bed if your settings are dialed in.

This one is especially fun for Easter-themed prints or just as a different take on the typical round fidget.

Features

• Egg-shaped gravity fidget

• Print-in-place design

• No supports required

• Adjustable ring count and spacing (via builder)

• Smooth gravity drop motion

• Works great as a desk toy or fidget

Uses / Ideas

• Easter basket items

• Desk fidget / stress relief

• Kids toys

• Party favors

• Quick and satisfying prints

• Great for experimenting with different tolerances

Print Settings (Minimal)

• Printer: Any FDM printer

• Supports: No

• Layer Height: 0.2 mm

• Infill: 10–20%

• Material: PLA recommended

Notes

• If your slicer asks to repair the model, allow it

• Let the print cool before removing from the bed

• If rings are tight, try slight scaling or tuning your flow

• Random seam can help improve appearance

Customization / Builder
Want to customize this or try different shapes?

https://stlplayground.com/3d-builder-tools/gravity-fidget-builder/

You can change the shape, size, number of rings, and how aggressively it drops.