Switch Power Socket bracket for Rook MK2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bracket to hole a standard PC power connector with fuse and switch to the bottom of a Rook MK2 frame.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 14
- Makes
- 0
- Views
- 97
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Bracket to hold a proper fused switched power connector to Rolohaun's Rook MK2 DIY printer.
I used this connector: https://www.amazon.com/dp/B0FZKQ6NSN
Screw sets need to be on the short edges of the power connector or the bracket is too tall to fit under the frame. Opening is 27.9x47.5mm.
Put 2 inserts into the rear facing extra hole on on side of the bottom frame piece and 2 inserts into the bracket to hold the socket in.
Also need:
M3x5x4 heat set inserts - 2 for the frame, 2 for the power switch
M3 screws - 2 for the frame, 2 for the power switch