Sega Dreamcast Holder for Blueretro / DreamPSU / PD Type C
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
DreamPSU With PD Type-C trigger board and BlueRetro Bracket
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 131
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution
WIP
If you have remove the original PSU, and you have installed DreamPSU With PD Type-C trigger board and BlueRetro you can use this to make the cabling tighter and more visually pleasing. i designed it with original PSU in mind. VA1 PAL Console.
Also i use fpc to connect Blueretro esp32 with the Controller board interface.
Please be nice to me,
This is one of my first attempt to make and share something with the community.
Print iflat in bed.
Enable supports if your printer is not good calibrated!
Parts i use
PD Trigger Board: https://s.click.aliexpress.com/e/_c4dY8jzj
ESP32 30pin: https://s.click.aliexpress.com/e/_c3BLv6XT
FPC Cable 12pin 0.5mm pitch: https://s.click.aliexpress.com/e/_c3W2vSX3
FPC Adapters 12pin 0.5mm pitch: https://s.click.aliexpress.com/e/_c2uB6rRX
DreamPSU: https://s.click.aliexpress.com/e/_c3AlrYsz
In the Pictures the other prints is..
ElectronAnalog Bracket by me:
ElectronAnalog HDMI Module Holder
For the GDemu i use this by the User: @KirillS_246314
GDemu mount
Sorry for my english.. is not my native language!