Victor Rat Trap "Cave"
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This cave helps ensure a more humane kill and, more importantly, helps get kills more consistently.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 28
- Makes
- 0
- Views
- 172
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Works with Victor Rat Trap model # M205TRI
I tried other designs here, but they would break when the trap was triggered due to the forces involved, and did not accommodate the wide pedal on this model.
Print upside down with supports for the little screw hole protrusion tabs. Or print right side up - shouldn't really matter, but the former probably uses less support material.
I printed on the CoreOne HF0.4 .25mm Structural Preset with Petg and this version did not break when used.
I modelled myself using calipers and also modeled the trap itself in case I ever wanted it for some reason. In any event, files both with and without the trap are included for Fusion 360 and .step.
The .stl model include the cave only.