Fan Guard for Prusa i3 MK3s - snapable
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.40 – €0.49 net (excluding VAT)
For file: First try at fan guard / fan_guard_40x40_clippable_v4_02mm_petg_mk3s_35m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.45 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 34.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
2020-Dec-29: Deleted rubbish.
- Rating
- 4.918 / 5
- Likes
- 1,059
- Downloads
- 5,315
- Makes
- 229
- Views
- 15,111
- Reviews
- 244
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
2020-Dec-29:
Deleted rubbish.
Update the version with bigger mash and smaller front to prevent hittig the leadscrew
2020-April-06:
Added new version with much smaller mash - only 0.4mm thick - to pretend hitting the leadscrew at homing the x-carrige.
the mash is also a bit bigger to supress the airflow noise a bit.
Added two models for normal 40x40 fans.
This is a fan guard - finger protector - for the cold end fan.
It just snaps over the fan.
much fun
Print instructions
Category: 3D Printer Parts Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: No
Resolution: 0.2
Infill: 15%
Filament: Das Filament PETG Neon Orange
Notes:
For Prusa: just used the generic PETG an 0.2 quality settings.