Easter Bunny Toothpaste Tube Squeezer // Osterhase Zahnpasta-Ausdrücker
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.23 – €1.51 net (excluding VAT)
For file: toothpaste_tube_squeezer_2slots_0.4n_0.2mm_PETG_COREONE_56m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.37 excluding VAT (range midpoint).
- Weight reported by the author
- 28 g
- Print time reported by the author
- 56.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Bunny-shaped toothpaste tube squeezer for Easter. Practical and decorative. // Zahnpasta-Ausdrücker in Hasen-Form.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 71
- Makes
- 0
- Views
- 209
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A compact, custom-designed toothpaste tube squeezer in a bunny shape, made especially for Easter. It helps squeeze toothpaste and similar tubes more evenly and makes it easier to use every last bit. Practical, decorative, and a fun 3D print for everyday use, gifting, or seasonal display.
For best stability I have printed the bunny with 90% infill.
I have published 3 versions:
toothpaste_tube_squeezer_2slots.stl (recommended, most flexible with 1.4 and 1.8mm slots)
toothpaste_tube_squeezer_18slot.stl (1.4mm slot)
toothpaste_tube_squeezer_14slot.stl (1.8mm slot)
--
Ein kompakter, selbst designter Zahnpasta-Ausdrücker in Hasen-Form, speziell für die Osterzeit. Er hilft dabei, Zahnpasta und ähnliche Tuben gleichmäßig auszudrücken und auch den letzten Rest einfacher zu nutzen. Praktisch, dekorativ und ideal als nützlicher 3D-Druck für Bad, Geschenkidee oder Osterdeko.
Für optimale Stabilität, habe ich den Hasen mit 90% Infill gedruckt.
Ich habe 3 Versionen veröffentlicht:
toothpaste_tube_squeezer_2slots.stl (empfohlen, am flexibelsten mit 1.4 and 1.8mm Schlitz)
toothpaste_tube_squeezer_18slot.stl (1.4mm Schlitz)
toothpaste_tube_squeezer_14slot.stl (1.8mm Schlitz)