Parkside 20V Cordless LED Hand Light Holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.41 – €2.94 net (excluding VAT)
For file: hand_light_holder_0.4n_0.2mm_PLA_COREONE_1h30m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.68 excluding VAT (range midpoint).
- Weight reported by the author
- 58 g
- Print time reported by the author
- 1.5 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Holder for Parkside hand light
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 33
- Makes
- 0
- Views
- 195
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This model is specific for Parkside 20V Cordless LED Hand Light Holder (IAN 494206_2504)
I use this flashlight as an emergency lamp in my workshop.
You can mount the lamp on the wall using two anchors, or wherever you prefer.
Printing instructions:
Please orient the part as shown in the image to achieve the best structural rigidity.
Supports are required.
Alternatively, use the 3MF file, which already includes all the print settings.Use 5 or more perimeters.
Material: PETG or PLA (I used PLA).
Enjoy!