CherryMX low-profile keycaps with Ukrainian Trident
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
replace the annoying Z key with a more neutral and not ideologically-loaded symbol
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 3
- Makes
- 0
- Views
- 57
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Printing recommendations
For the low-profile cap I recommend having manual supports around the outline of the cap and outer brim (for the stalk to hold well). Fully-supporting the cap may create difficult-to-remove supports, and the model is small enough for bridging to work well.
For the high-profile one, although I didn't print it, I expect only support for the stalk is needed.
Getting the Trident printed well
If you're using .4mm nozzle it may be difficult to get the trident printed well as it's very small. My setting that gave a good result (using 0.16mm layer height):
For color changing
Since the setting above are pushing on the extrusion control limits of the printer, the first layer of the trident may be a bit messy. Because of this I recommend adding a color change/pause to a second layer of the trident.