Alesis Nitro Mesh Low Rim Mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print it if you hate the original rims.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 30
- Makes
- 0
- Views
- 141
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wasn’t a fan of the original rims on the Alesis Nitro Mesh Kit pads, so I designed a lower-profile replacement.
The base is printed in PETG with 10% infill and 4 walls for strength and rigidity.
The upper rim is printed in TPU with 1 wall line and 5% infill to provide a softer contact surface and reduce stick impact.
To improve adhesion between the two parts, I enabled the “interface shells” option in the slicer.
If you don’t have a multi-extruder printer, you can pause the print at layer 85 (with a 0.2 mm layer height) and manually switch to TPU.
For better adhesion, I recommend printing the first TPU layer at a slightly higher temperature than usual.