KAC MP5 RAS DPP Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
same model using Delta Point Pro mount style cut from https://www.printables.com/model/273318-deltapoint-pro-picatinny-m
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 55
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Combined two designs to make this design
This has not been tested and should be used at your own discretion, your optic could break and you should be aware of that risk.
The two files attached named low mount and mid mount are not that different. The low mount is 1mm lower than mid mount, mid mount is not a true mid mount its just what i named it for ease of design. I started with the mid mount but also wanted to go lower. The notes below are from the original creators and not my own reflection.
Main Body:
I recommend visiting the link and going to details for guidance on how to print and more information.
https://www.printables.com/model/1004282-kac-mp5-ras-style-t12-mount
Designed to fit on the VFC KAC MP5 rail fitted to a WE MP5, but as long as the distance between rails is 55mm (+/- 0.1mm ish) it should fit. Some slight fitment may be required depending on the printer. (If you check yours and its different let me know and I can make an updated file.)
Printing:
I would also suggest using 4-6 walls, other than that it shouldn't really matter. Post-printing you will need to remove a bit of support and may need to take a 5mm drill bit to the screw holes if they're a bit tight but that's it.
Attachment:
To attach it to the rail you just need 2x M5x10mm button head screws and optionally 2x M5x10x1mm washers. If the screws are any longer then 10mm and they will go past the rail and scratch the paint on the MP5 and any shorter and you are risking striping the threads on the handguard.
DPP Mount:
https://www.printables.com/model/273318-deltapoint-pro-picatinny-mount/files
This is a mount for the Leupold Deltapoint Pro (and similar) pattern of micro optics. It's designed to use the standard M4 screws that ship with the optic, and heat set M4 inserts- specifically, McMaster 94180A351. The Picatinny section uses 30mm M3 hex head capped screws (91290A171) and hex nuts (90592A085).
I've tested printing this with up to a 0.6 nozzle and 0.2 layer height- smaller nozzles and layers will work better, of course.