1 / 1
Eboshiiwa(KANAGAWA) HueForge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I created an Eboshiiwa using HueForge.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 5
- Makes
- 0
- Views
- 19
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print with 100% infill and a layer height of 0.08mm. The base layer should be 0.16mm.
Swap procedure: Initial filament: Black
Switch to the next filament at layer #10 (0.88mm): White
Switch to the next filament at layer #12 (1.04mm): Sky Blue
Switch to the next filament at layer #14 (1.2mm): White (use until the final layer)