FCS_Chimera Surfboard Fins
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A couple unorthodox surfboard fins inspired by 1980s provotypes. Release Package no.2 designed using Desmos and FreeCAD.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 33
- Makes
- 0
- Views
- 198
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
Instructions:
To optimise for FDM printing, all fin files are a half cross section perpendicular to the z-axis.
Pre-Process: Ensure filament is UV and water-resistant.
Process: Mirror along the x-axis within the slicer before printing the second half or opposing side fin.
Post-Process: Fuse both halves together using 10 parts acetone to 1 part ASA or a marine grade epoxy. Then sand and/or vapour smooth.
Optionally, to save time and post-processing for the side fins; double the z-axis height within the scale function of the slicer. This eliminates the necessity for a second half to print and fuse but it does leave a flat edge on the inside faces.