1 / 16
Angled down blower fan part cooling ducts with indents corners for J-Head, CR10 or other hotend.
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cooling layer ducts to replace OEM-supplied ones. The cooling outlet has indented corners for added clearance.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 43
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
This design is printable with or without supports, but only from the build plate.
Printed with internal supports, it can be difficult to remove without destroying the print, in my experience.
Print Settings
Printer settings:
Printer: Any
Supports: Yes*/No
*Supports only permitted from build plate.
Resolution: 0.10 - 0.20 mm
Layer Width: 0.30 mm
Infill: 100%
Filament: Any filament suitable for printer parts: ABS, PLA, PLA PLUS (+), PETG