Silicone applicator syringe nose
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed to apply silicone to the joint of ceiling and wall. I used small syringe to do that. The syringe nose was not…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 17
- Makes
- 0
- Views
- 601
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
I needed to apply silicone to the joint of ceiling and wall.
I used small syringe to do that.
The syringe nose was not optimal length nor width.
I created one.
You print and just plug it in.
For standard syringe heads. ~4mm+ inner diameter of the 3D modeled cap.
Cap is quite tight which is what you want so it stays on.
In the syringe in the picture is tapped which makes the cap grab really tightly. Would work with normal syringe too.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2S
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament:
PolyMaker PLA
Notes:
As simple as it gets.
Category: Parts