1 / 3
Prehistoric ancestor of Otto discovered: Otto zipaconensis — image 1
1 / 3

Prehistoric ancestor of Otto discovered: Otto zipaconensis

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A prehistoric ancestor of Otto was discovered during excavations in Colombia!

Rating
0 / 5
Likes
1
Downloads
2
Makes
0
Views
48
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

A few days ago, the renowned anthropologist C. Pallaccio made a sensational discovery during an excavation in Colombia. A well-preserved ancestor of the still-living Otto DIY was found by pure chance during construction work. The original Otto appeared to be covered all over with horn-like structures. Presumably an adaptation to the dry and cold climate that prevailed during the early Otto’s lifetime. Surprisingly, a structure was identified on the ankle joints that suggests an early form of ball bearings. An accompanying find suggests that Otto zipaconensis—as this early form was named after its discovery site—possessed a small brain in the shape of an ATtiny84. The four muscle attachments appear to have changed little compared to the Otto living today and accommodate servos of a size still known today.

The working group led by C. Pallaccio designed a life-size replica using OpenSCAD and kindly made it available to the public.

The reconstruction of the ATtiny84 brain is still in progress (see image 3).

Four SG90 servos are required for assembly. Otto z.. is adapted to the servo size I have on hand. The two ball bearings are 3 mm thick, have an outer diameter of 10 mm, and an inner diameter of 4 mm.

For power, there is a recess in the platform for a battery holder that accommodates CR123A batteries.

Printing: PLA was used to produce the replica. When printing the head, it is recommended to create an internal support structure only. This should also be used when printing the legs and feet.

Assemble: First, screw two of the servos onto the platform so that the shaft is centered on the platform. Single-arm servo horns are mounted in the legs and slipped onto the shafts of the platform’s servos, then screwed in place. Next, the two remaining servos are inserted into the legs and screwed into the upper tab through the existing hole. Two servo horns are attached from the outside to the corresponding recesses in the feet. Attach the feet to the legs and tighten the servo horns. Finally, snap on the ball bearings.

Uuups: The stl-file seems to be too large for upload here. It has an size of 1.5 Gb.

OpenScad: The three files helper_v03.scad, power_16340.scad, and servo_g9_v02.scad must be copied to a folder named “lib”.

############################################

Vor ein paar Tagen wurde von dem bekannten Anthropologen C. Pallaccio bei einer Ausgrabung in Kolumbien eine sensationelle Entdeckung gemacht. Ein gut erhaltener Vorgänger des noch heute lebenden Otto DIY wurde dabei durch einen großenZufall bei Bauarbeiten gefunden. Der Urspungsotto schien über und über mit hornartigen Strukturen übersät. Vermutlich eine Anpassung an das trockene und kalte Klima, dass zu Lebzeiten des frühen Ottos herrschte. Erstaunlicherweise wurde an den Fußgelenken eine Struktur identifiziert, die auf die frühe Form von Kugellagern schließen lässt. Ein Beifund lässt vermuten, dass Otto zipaconensis - so wurde diese frühe Form angelehnt an den Fundort getauft - ein kleines Gehirn in der Form eines Attiny84 besaß. Die 4 Muskelansätze scheinen sich gegenüber des heute lebenden Ottos kaum verändert zu haben und nehmen Servos einer noch heute bekannten Größe auf.

Von der Arbeitsgruppe um C. Pallaccio wurde mittels OpenScad eine lebensgroße Nachbildung entworfen und der Allgemeinheit dankenswerterweise zur Verfügung gestellt.

Für den Zusammenbau sind 4 SG90 Servos nötig. Otto z.. ist auf die bei mir vorhandene Servo-Größe angepasst. Die zwei Kugellager sind 3 mm dick , haben einen Außendurchmesser von 10 mm und einen Innendurchmesser von 4 mm.
Für die Stromversorgung ist in der Plattform eine Aussparung für eine Batteriehalterung, die CR123A Akkus aufnimmt.
Zuerst werden 2 der Servos so auf die Plattform geschraubt, daß die Welle sich in der Mitte der Plattform befindet. In den Beinen werden einarmige Servohörner montiert und auf die Wellen der Servos der Plattform gesteckt und verschraubt. Danach werden die beiden restlichen Servos in die Beine gesteckt und an der oberen Lasche durch das vorhandene Loch verschraubt. 2 Servohörner kommen von außen an die entsprechenden Aussparungen der Füße. Die Füße werden an den Beinen befestigt und die Servohörner festgeschraubt. Zum Schluss werden die Kugellager aufgesteckt.

Druck
Zur Herstellung der Nachbildung wurde PLA verwendet. Beim Druck des Kopfes empfiehlt es sich eine organische Stützstruktur nur im Inneren erstellen zu lassen. Diese sollte auch beim Drucken der Beine und der Füße verwendet werden.

Die stl-Datei für den Kopf scheint für einen Upload leider zu groß. (1,5 Gb). Sie kann über die Openscad-Dateien erstellt werden

OpenScad: Die drei Dateien helper_v03.scad, power_16340.scad sowie servo_g9_v02 müssen in einen Ordner namens "lib" kopiert werden.