Mob Psycho 100 Hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is Mob (Shigeo Kageyama) from mob psycho 100.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 37
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Standard Digital File License
This is Mob (Shigeo Kageyama) from mob psycho 100.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 160x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.08mm
Filaments Used:
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#482960 PLA BambuLab Basic Indigo Purple Transmission Distance: 1.1
#e2dedb PLA PolyLite White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Indigo Purple
At layer #19 (1.6mm) swap to White for the rest.
Those are just the filaments i had on hand. use whatever you want.
You can replace the purple with just about any color and it should still look good.
To scale it, change the x and y dimensions, do not change the z dimension.