1 / 7
M365 Cable Protector Silicone Mold
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print with PLA and then fill with household silicone -> let cure for ~2days then open the mold and fit the cable…
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 24
- Makes
- 0
- Views
- 362
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial
Print with PLA and then fill with household silicone -> let cure for ~2days then open the mold and fit the cable protector
You need the following hardware:
2x M3x30 Screws
4x M3x16 Screws
6x M3 Nuts
Category: Sport & Outdoors