1 / 5
FlashForge Adventurer 5M/5M PRO HGX 2.0 Extruder — image 1
1 / 5

FlashForge Adventurer 5M/5M PRO HGX 2.0 Extruder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Extruder with 2.0 gears (And 1.0 main gear) 4 gramms lighter, and even better grip.

Rating
0 / 5
Likes
17
Downloads
54
Makes
0
Views
581
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Here's the remix of my HGX 1.0 extruder for ff5adm based on HGX 2.0 gears. 

But you'll still need HGX 1.0 main gear, because it's longer than 2.0.

Or you can print it from nylon (PA) or POM with 0.2 nozzle if you can. I tried, but my printer is not printing circles properly. I included the gear in models, you'll need m3x18 pin for it

What you'll need: 

HGX 1.0 extruder kit

HGX 2.0 extruder kit 

m3x12 screw(from original extruder)

m3x14 screw

m3 heat insert

Print in ABS front part with 0.2 (0.25) nozzle

I printed back part with 0.2 nozzle, arm with 0.6 nozzle. But i think you can print them with 0.4

Some grinding still needs to be made unfortunately. In the first image you can see that the metal gear touches the metal part of the wheel. We don't need that, so about 1 mm needs to be grinded off.

How to install:

remove 3 screws from extruder, save one of them

remove right screw from a motor

remove hotend fan from old extruder, save 1 screw

remove the thumb nut from long screw that you put spring on

add heatset insert into front part of the new extruder

assemble new extruder with 2 gears from 2.0 and main gear from 1.0

screw in hotend fan with one screw

install new extruder with one old screw and one m3x14 into right motor hole

Calibrate rotation distance!

And change direction pin

[extruder]
dir_pin: eboard:PB15
rotation_distance: 5.6