Catan Hex Frame - Non-magnetic Interlocking
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.16 – €0.20 net (excluding VAT)
For file: 1ea_Catan Hex Frame - Non-magnetic Interlocking_0.4n_0.2mm_PLA_COREONE_9m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.18 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 8.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A minimalist non-magnetic interlocking frame for Settlers of Catan hex tiles.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 72
- Makes
- 0
- Views
- 359
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I don't like when the Catan hex frames slide around and the roads don't stay where you put them. I also didn't like any of the magnetic frames because I didn't want to have to go find or supply dozens of tiny magnets, and all of the other frames were either larger than I wanted, or were an entire scene rendered in plastic.
So I decided to just go design my own. These take less than 10mins to print on a Prusa Core one and only use about 3g of filament each. The 3.1" hex tiles press in nicely to the frame and stay put, but are still able to be popped out if needed. The roads are positively located in a recess formed between two pieces. The settlements and cities aren't postively located, but tend to stay contained between roads when inserted.