1 / 2
Pin Backer for PLA and Standard Filaments
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An easy to print pin backer-- fits most enamel pins. Does NOT require TPU.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 32
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Not much to describe, just a quick and easy backer for enamel and novelty pins. Other designs I found on Printables required TPU or left the pin post exposed. The fit on this model is intentionally snug to work with rigid filaments. If you find it too snug, try scaling up by 1-3% in your slicer.
Features
Prevents accidental stabbings!
Rounded to avoid snags.
Super fast print! Finishes in less than 5 minutes.
Recommended Settings
Layer Height: 0.20 mm
Walls: 3
Infill: 15%
Material: PLA/PLA+, PETG, ABS
Supports: No
Change Orientation: No
Brim: No