Smart Effector - Adafruit ADXL 343 accelerometer (4097) mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a mount for the ADXL 343 (for Klipper fully compatible to ADXL345) accelerometer from Adafruit. It is designed…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 36
- Makes
- 0
- Views
- 379
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- GNU General Public License v2.0
This is a mount for the ADXL 343 (for Klipper fully compatible to ADXL345) accelerometer from Adafruit.
It is designed with clearence for a M12 half-nut in mind which is default for E3D and TriangleLab, Mellow etc. M12 heatsinks and also most Dragon/Mosquito/Rapido adapters.
No supports needed. It's just a small overhang and bridge.
You need:
- Adafruit ADXL343, PartNumber: 4097
https://www.mouser.at/ProductDetail/Adafruit/4097?qs=2WXlatMagcFRg4bqWx%252Bytw%3D%3D
or https://www.amazon.com/Adafruit-4097-ADXL343-Triple-Axis-Accelerometer/dp/B07PN6ZBJF
- 2pc M2.5x8mm screws (the ADXL343 has 2.4mm mounting holes, not 3mm like the ADXL345s)
- 2pc M3x6mm (minimum)
- 2pc M3 nylon nuts (for the underside of the effector)
- 2pc M3 nuts
Feel free to remix this if needed.
Happy Input Shaping and Resonance Measuring!
Print Settings
Printer Brand:
Anycubic
Printer:
Predator
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
100%
Filament: doesn't matter something rigid but not too brittle as the M2.5 screws directly into plastic, PLA, ABS, should all work fine doesn't matter
Notes:
The M2.5 screws go directly into the plastic. For me it's holding up just fine.
Category: 3D Printer Accessories