VL80T Russian/Soviet electric train N scale
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
N scale model of Russian electric train "VL80T"
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 87
- Makes
- 2
- Views
- 575
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles & Machines
- License
- Standard Digital File License
WARNING
It's static model, so it may doesn't fit some types of rails. You can make it fit by reengineering the bogies
ENG:
The VL80T (ВЛ80Т)
This is N scale model of train "VL80T" It was used on USSR/CIS countries/Russian railroads. The VL80T is a two-section locomotive composed of two identical units. It was producted from 1961 to 1994 by NEVZ (НЭВЗ). This electric train uses AC 25 kV 50 Hz overhead power line.
Models
Models are made in Blender in N scale. Easy printable, needs glue.
Hardware
Glue
1mm wire
2х M2 4mm screw
Printing
Print models with high resolution. Supports aren't necessary.
Post-printing
Sand where necessary, paint parts if you need. Assemble bogies using 1mm wire (for N scale (1/160) or 1/144, when increasing the scale to HO (1/87) or 1/72, use 2mm wire or 1.75mm filament). Glue parts together.
RU:
ВЛ80Т
Это модель поезда «ВЛ80Т» в масштабе N. Он использовался на железных дорогах СССР/СНГ/России. ВЛ80Т — двухсекционный локомотив, состоящий из двух идентичных блоков. Он производился с 1961 по 1994 год компанией НЭВЗ. Этот электропоезд использует контактную сеть переменного тока 25 кВ 50 Гц.
Модели
Модели созданы в Blender в масштабе N. Легко печатаются, требуется клей.
Инструменты
Клей
Проволока 1 мм
2х Винт М2 4мм
Печать
Печатайте модели с высоким разрешением. Поддержки не требуются.
Постобработка
Шлифуйте при необходимости, покрасьте детали, если нужно. Соберите тележки, используя проволоку толщиной 1мм (при масштабе N (1/160) или 1/144, при увеличении масштаба до HO (1/87) или 1/72, используйте проволоку 2мм или пластик толщиной 1.75мм). Склейте детали.