PS5 Controller Stand With Cool Chains
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.54 – €1.88 net (excluding VAT)
For file: PS5 Controller Stand With Chains and 25% Infill 0.4n_0.2mm_PLA_MINIIS_1h46m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.71 excluding VAT (range midpoint).
- Weight reported by the author
- 20 g
- Print time reported by the author
- 1.77 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This looks really cool. The controller blocks out everything else so it looks like its floating.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 44
- Makes
- 0
- Views
- 348
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
This looks super cool. I recommend using 25% infill otherwise when you remove the supports it will be to thin and break> You can even go 50% infill if you want but no more than 50%. Break the supports off carefully. You can use tpu if you want.