1 / 1
Vertical spinner battlebot model
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Public Domain
this is a model of a generic vertical spinner battlebot. To assemble the model, you will need m3 bolts and an m3 tap or just some small self tapping screws. start out by putting the wheel hubs into the wheels and gluing them in place. After that, bolt the side and back bumpers into their respective locations on the main body. next, use long m3 bolts to mount the wheels to the bot. after that, glue the spinner parts together and onto the model, then just bolt the top on and your done!