3MS mmu hub: Low Rider (3,4,5, or 6 lanes)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Low profile 3MS lane hub
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 14
- Makes
- 0
- Views
- 247
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is my shrunken down version of the 3MS MMU.
Its been sized to fit Nema 17 42x23mm stepper motors to greatly reduce the height of the unit. Ive also edited the modular sections to make it look cleaner on the outside.
I have multiple base options. Choose 3, 4, 5, or 6 lanes.
The 4,5, and 6 lane versions have split file versions so it can be printed on most sized machines. Check the 3mf file for these.
This can print support free if you printer is decent at bridging.
To mount to printer there are some holes available for m3 hardware to attach to a top 2020 extrusion. Or you can mount it to your enclosure with vhb tape like I did.
Check the images for advice on cable management.
I didn't include a design for a mcu enclosure since this can be use with whatever you have laying around. In my installation I used a skr e3 v2 board mounted in a box on the back of my printer. I ran all my MMU cables though a cable sleeve into that box. Doing so reduced visual clutter on the top of the printer.
Ive included the step file if you want to mod it for larger stepper motors.
Stay tuned for my dual sensor bmg extruder design. (this has the most reliable sensor design I've uses yet and i tried every one available on here before) I'm fishing up the documentation for it soon.
