Bitonal Whistle Bases (Alert whistles)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bases to build 2d shaped whistles on. NOT for toys. CC0 public domain dedication.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 13
- Makes
- 0
- Views
- 58
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Public Domain
I'll get a proper write-up done later, but I wanted to throw these up and have them available. These are some bitonal whistle bases designed to make it easier to remix some flat whistle shapes.
Like my other whistles, these are loud and not meant as toys! At least one of these hit 130 dB.
The outlet of the whistle prints on the bottom, so you only have to worry about making sure the input (the mouth bit) sticks out a little from the shape. (I recommend at least 2mm.) You will probably also want to add a key-ring hole. They're all 5mm tall and designed primarily to be printed with a 0.4mm nozzle at 0.2mm layer height.