Masterful Dungeons Tile Base – Budget Underside
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Low-filament base for Masterful Dungeons tiles. Designed to maximize coverage when filament usage is a concern.
- Rating
- 4.5 / 5
- Likes
- 13
- Downloads
- 186
- Makes
- 2
- Views
- 492
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Props & Terrains
- License
- Creative Commons — Attribution — Noncommercial
Masterful Dungeons Tile Base is designed as part of the Masterful Dungeons modular dungeon system.
This base is an alternative underside for tiles, intended specifically for saving filament. Instead of using fully double-sided tiles, this piece allows you to build larger layouts while using significantly less material.
The base uses respectively 2 or 5 grams of filament, depending on the variant, making it suitable for budget-focused builds or large-scale setups.
This piece is not intended to replace the standard double-sided tiles. It does not support all features of the full system, but provides a practical option when maximizing coverage is more important than full functionality.
Instructions for the tiles can be downloaded HERE |  |
|---|
Key features
Compatible with the Masterful Dungeons tile system
Low filament usage (approx. 2 or 5g per piece)
Designed to maximize dungeon coverage on a budget
Alternative underside for floor tiles
Allows larger builds with reduced material cost
Magnets work, but clips might push apart the tile-half and this base piece.
Filament
I test out a lot of different filaments for each of my specific builds, to make sure that the strength and print quality is as good as they can be. My filament recommendations can be found on my website HERE.
(NOTE: The links on my site are affiliate links)
Magnets
The tiles and this tool were designed to use 5x2mm magnets.
I buy them on Amazon as this is where I've been able to buy the most at the same time and at the best price:
Affiliate link
Non-Affiliate link
Printing notes
Designed for standard 0.2mm layer height
Use 5% Gyriod infill
No supports required
Help me expand the collection
You support is directly tied with how much I can work on these tiles.
If you like what I do, please consider donating to me on Patreon or subscribing to my campaign Secrets of Ke'Landor which is a fully curated campaign, centered directly around these tiles.
Even just subscribing to my TikTok or YouTube channel or visiting my website can be a big help.