1 / 7
Acura RSX Group 35 Battery Modification | Tray Spacer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple battery tray spacer with included modification instructions. | May also fit EP3 Civic
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 4
- Makes
- 0
- Views
- 75
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
The spacer is designed so you don't need to use washers on the battery tie down.
You will need a M8x1.25 12mm low profile flat topped cap screw. (the head is 3mm tall)
The spacer is also 3mm tall
I had an impossible time trying to print it out of Polycarbonate, but if your printer is better I recommend Nylon or PC. However the minimum you should use is ABS or ASA plastic like I did. (mine is printed in black gizmodorks ASA)
Should also fit the JDM DC5 Honda Integra.