Valve Index 200g clip-on counterweight
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a 200g counterweight which can be attached to the lower backhead brace of the Valve Index.
- Rating
- 4.667 / 5
- Likes
- 9
- Downloads
- 61
- Makes
- 4
- Views
- 745
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Virtual Reality
- License
- Creative Commons — Attribution
This is a 200g counterweight which can be attached to the lower backhead brace of the Valve Index. It helps to shift the weight into the center of the head.
For weight, 50 x 5€ct coins are used. For assembly, 6 x 15mm M3 countersunk machine screws are used.
Attachment can either be done by using the two clips or some velco straps though the two slots.
Inspired by https://www.thingiverse.com/thing:4795942
Print Settings
Rafts: Yes
Supports: No
Resolution: 0.2mm
Infill: 15%
Filament: Any PLA Black
Notes:
Arrange the clamps to lie flat on their side. The lid and base can be printed with their plungers and holes up, respectively.
Add coins
Insert 5 x 10 5€ct coins into the holes of the base. If they rattle, place a small piece of folded paper on the top of each stack.
Screw together
Use 6 x 15mm M3 countersunk machine screws to attach the lid to the base and the clamps to the base.
How I Designed This
The clamps can be found standalone here: https://www.thingiverse.com/thing:5177502
Category: Video Games