1 / 2
Stand for 13"/14" Notebooks
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
The both side parts should be printed with a filament that can resist higher temperatures. I made good experience with PETG. The pads should be printed with TPU.
To mount the two parts together, two rods with a diameter of 8mm and 250mm length are required. I used simple aluminium rods. The pads I glued with double sided tape.
Optionally, four pads with a diameter of up to 28mm can be used as feet by glueing them beneath the stands.
The rough dimensions of the stand are:
- ~165mm in height
- ~267mm in width
I printed the stand in PETG with a 0.6mm nozzle, 5 perimeters, 0.3mm layer height, and 25% infill.