Geared Phone Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Geared Phone Stand 3 version
- Rating
- 4.962 / 5
- Likes
- 709
- Downloads
- 2,643
- Makes
- 24
- Views
- 11,821
- Reviews
- 26
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Geared phone holder
A new, completely redesigned 3rd version of the popular phone stand. This time the gearing is inside the arc, making the stand lower and more stable. It is a little wider than the previous one.
For phones from 75mm wide. The charging hole is in the middle of the holder in the front.
I wanted to make the stand Print-in place, but it would require a lot of restrictions. It has 5 parts, assembly is easy. The adjustment wheel is on the right side, if there is interest, I will turn the helix and make it for left-handed people.
For fine angle adjustment, the wheel has 12 grooves.
Because the parts have a small contact area, you can also use a brim, be careful not to get the hex inside the adjustment roller. I printed without a brim - then it helps to clean the printing plate with Isopropyl and gently roughen it with a scotch brite



