Razer Orochi v2 replacement top shell STL, STEP, F3D
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Summary I print at a 45 degree angle with manual supports (screenshot example). This orientation has worked best for me.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 43
- Makes
- 0
- Views
- 269
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Summary
I print at a 45 degree angle with manual supports (screenshot example). This orientation has worked best for me. 70 degrees gave me issues with the click tolerances and I didn't want to edit the file so I'd stick with 45 degrees although I'm sure others work, potentially with minor modifications. Similar weigh in PLA. Basically just for if you lose/break yours somehow or something. STEP, F3D, and STL included so you can edit the shape and mess around with it.
I use some G305 screws for the magnetic back corner standoffs. The hole diameter is 1.3mm.
Print Settings
Printer brand:
Prusa
Printer:
Prusa Mk2
Rafts:
No
Supports:
No
Resolution:
200
Infill:
10
Filament brand:
eSun
Filament material:
PLA+