Arjun
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.88 – €4.74 net (excluding VAT)
For file: arjun_03mm_pla_mk3_3h44m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.31 excluding VAT (range midpoint).
- Weight reported by the author
- 66 g
- Print time reported by the author
- 3.73 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Arjun is a friend from CNIB. This thing is 178 mm long x 65 mm high x 20 mm deep.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 20
- Makes
- 0
- Views
- 261
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Share Alike
Arjun is a friend from CNIB. This thing is 178 mm long x 65 mm high x 20 mm deep. It is made with SketchUp 2015 using the Arial Bold font.
Print instructions
The infill is 20% for the Arj and 10% for the un. This is done with a modifier in Prusa Slicer. The intention is to put more weight on the Arj to keep the model in the intended orientation.