Prusament Core (AMS Compatible)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple print that replaces the cardboard core of the Prusament spools, so you can use it with AMS.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 12
- Makes
- 0
- Views
- 201
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Benefits of this core:
Reduces the overall width of the spool to bring it into spec of Bambu's AMS, so it can be used on the AMS without issue.
Fits on the inside of the hub instead of over, so after respooling, the filament isn't all the way on the edges (which makes it easy to fall off the spool)
This also means a smaller core, and less material needed to print it
Support free, can be used right after print, no need for support removal
Friction fit, model is sized perfectly to friction fit into place, no additional hardware needed
Screw holes, in the case of different material shrinkage, or you just want to be safe, screw holes are provided so a 3mm screw can self tap and hold the spool together
filament hole, perfectly size, shaped and angled hole to hold the filament in place while respooling
AMS can also easily pull the filament out of the hole at the end of the spool