FlashForge Adventurer 5M Filament Cutter - compatible with Lightweight Duct and Headcap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An integrated filament cutter compatible with my remixed Lightweight Cooling Fan Duct and Headcap + Bowden Tube Holder
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 75
- Makes
- 0
- Views
- 364
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
There are many filament cutters for the FlashForge A5M on here, but none fit my needs.
The Lighweight Cooling Fan Duct I remixed adds a perfect spot in the front to put a button to cut filament, and the Lightweight Headcap I remixed takes up some of the space, so I had to design it to fit in the exact space available.
This cutter is deisgned for the bowden tube to pass through it, so you do not need to cut your bowden tube shorter, or cause it to bend sharper, just run it completely through. This means you need to pull the bowden tube out BEFORE cutting the filament.
It is also designed to need no bolts, it holds itself with little clips. Be gentle with them until they are inserted completely, then you shouldn't have any problems ;) (still need 2 pen springs though)
Also, this uses the 25mm snap off blades... cause it's what I had. It will still need some glue to stay in place.
Button 2 has no letters if you don't like your button to say "CUT"
If you are using the stock fan duct and headcap, this integrated cutter should work well for you:
https://www.printables.com/model/1153361-flashforge-adventurer-5m-filament-cutter