1 / 4
Loc-Line 1/4" Assembly Pliers
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model of pliers for manual assembly of flexible tubing. Assembled and tested. Works well.
- Rating
- 2 / 5
- Likes
- 4
- Downloads
- 97
- Makes
- 0
- Views
- 223
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — NoDerivatives
Attention!
Print preparation is only available for STEP format model.
STL model is for viewing only.
PLA Print mode. Nozzle: 0.4 mm. Print mode: 0.2 mm strength.
The model must be printed as shown in the example.
For assembly, you need to buy a DIN912 M5x35 screw and an M5 nut.
Please write in the comments with requests for improvements and refinements.