Classic Mini blinker canceler for Mountney steering wheels
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Classic Mini blinker canceler tab for Mountney steering wheels
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 61
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Many Classic Mini's have an aftermarket steeringwheel. This tab makes the blinker canceler work again with Mountney aftermarket steeringwheels.
Required:
2x Ø3,5 L=25mm Dowelpins
Mounting instructions:
After printing you will need to drill out the ~Ø3mm holes to Ø3,5mm. Those found on the underside of the steeringwheel boss and the 6 holes from the 3D print.
Using a hammer tap the dowelpins into the steeringwheel boss.
Now tap the pastic spacer onto the steeringwheel boss and your steeringwheelboss should look like the picture below.
Align the tabs with the slot inside the blinker assembly.
Mount the steeringwheel boss onto the shaft like normal.