12mm Ball Bearing Speedometer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ball Bearing Speedometer frame. Needs two photodiodes, two LEDs (Amazon sells packs with both of these), an Arduino or…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 136
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Ball Bearing Speedometer frame.
Needs two photodiodes, two LEDs (Amazon sells packs with both of these), an Arduino or similar microcontroller, two 10M resistors, and two 220 ohm resistors.
The frame should print with no supports, although I'm still working on the best way to print the track connectors.
(See https://www.paleotechnologist.net/?p=4740 for description.)
Print Settings
Printer Brand:
Monoprice
Printer:
Maker Select Plus
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament: Amazon PLA Black
Category: Mechanical Toys